- interior and exterior environments
- One Step Process;
- enhance colors
- Resists Stains;
- rejuvenate appearance of stone
- Granite
- Limestone
- Marble
- Slate
You may use 511 stone sealer enhancer for polished and unpolished Granite, Slate, Marble, Terrazzo. It will seal the floor and enhance the colour of it.
Enhance the colour
511 Seal & Enhance Is a unique, solvent-base formula designed to eliminate the need to use an impregnator before using a color enhancer because it is done in one step. Use the applicator or use a floor machine with a clean bonnet. Pour 5 – 6 oz. (about 150 ml) 511 Seal & Enhance on to one edge of the bonnet and start up the machine.
How to apply
Bear in mind more is not good. What you need is a thin layer of 511 Seal & Enhance on the floor. Make sure there is no puddle anywhere. Remove excess 511 Seal & Enhance with a clean rag or with a clean dry bonnet. Once the job is done, leave it to dry for a day. Don’t use it for traffic for 12 hours.
What if you apply too much?
If you put down too much 511 Seal & Enhance then you must remove it with Residue Remover, which is a unique solvent, based fast acting formula. It will remove accumulated residue left by the 511 Seal & Enhance on the surface from over application. One more thing, test the floor and have the result approved by the person who pays the bill. The floor may look nice to you but “beauty is in the eye of the beholder”
Wipe off excess material within half an hour after applied and let it dry for a day.
